🚀 LIMITED TIME OFFER: Free Remote Consultation & System Audit in Lucknow. Ends in 2 Hours!
🔥
6 people in Lucknow
are looking at this right now

Configure Tata SIP Trunk on ViciDial in Lucknow

Step-by-step integration and dialplan configuration guide for Tata Tele Business Services SIP trunks on ViciDial. Call +91 75999-67999.

Integrating Tata SIP Trunk with ViciDial

Integrating a Tata Tele Business Services SIP Trunk with a ViciDial environment requires specific configuration parameters to ensure outbound call authentication, correct inbound DID routing, and clean audio delivery. Our telecom engineers at Call Soft Corporation have prepared this complete configuration guide to assist call center administrators and network engineers in Lucknow.

Depending on whether your Tata trunk uses IP authentication (matching your static IP gateway) or user registration (auth username and secret), you will need to add custom PEER settings and Dialplan routing rules in ViciDial.

1. ViciDial Configuration Settings

In the ViciDial Admin interface, go to Admin -> Carriers -> Add New Carrier and set:

Carrier ID: TATASIP
Carrier Name: Tata SIP Trunk
Registration String: ; Not required for IP-based trunks

Account Entry:
[tata_vicidial]
type=peer
host=CARRIER_SBC_IP
context=trunkinbound
disallow=all
allow=alaw
dtmfmode=rfc2833
qualify=yes
nat=force_rport,comedia
insecure=port,invite

Protocol: SIP
Globals String: TATADIAL = SIP/tata_vicidial

Dialplan Entry:
exten => _91NXXNXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _91NXXNXXXXXX,2,Dial(SIP/${EXTEN:1}@tata_vicidial,,tTo)
exten => _91NXXNXXXXXX,3,Hangup()

2. Gateway Routing & Firewall Setup

For most Indian operators, voice traffic must be routed via a dedicated gateway interface on your server or router. Ensure that your server is configured with the correct static routes. For example:

ip route add <SIP_Proxy_IP_Range> via <Telecom_Router_IP>

Additionally, disable SIP ALG on your office router or firewall. SIP ALG commonly alters headers and breaks registration or causes one-way audio issues. Ensure UDP ports 5060 (SIP signaling) and UDP ports 10000–20000 (RTP media) are open and forwarded correctly.

Frequently Asked Questions

❓ Why am I getting "403 Forbidden" errors on outbound calls?

This usually occurs if the outbound Caller ID set in your dialer/PBX does not match the active DID or pilot number authorized by Tata. Double check that the Caller ID format conforms to your telecom provider's requirements.

❓ How do I handle one-way audio on ViciDial?

One-way audio is almost always caused by missing static routes on your Asterisk OS or firewall issues (NAT configuration). Make sure the media IP range of Tata is routed correctly and RTP port forwarding is enabled.

❓ Can Call Soft Corporation help us configure our dialer?

Yes, we provide complete remote and on-site integration support for all dialers and operators across India. Call our certified engineers at +91 75999-67999 for instant help.

Contact Us Now

Open until 7:00 PM in Lucknow

Get expert advice and best prices in Lucknow.

📞 +91 75999-67999 💬 WhatsApp

Customer Feedback in Lucknow

Real reviews from businesses using our VoIP solutions.

★★★★★

"Call Soft Corporation is the best VoIP partner for businesses in India."

Arjun Kapoor 21 Jun, 2026
★★★★★

"Smooth transition from analog to VoIP. Very cost-effective solution."

Prateek Jain 16 Jun, 2026
★★★★☆

"Good support for our PRI card repair and replacement."

Abhishek T. 20 Jun, 2026
📞 Call Now 💬 WhatsApp
💬